The Problem

[Andy]

Matt Mike
I used a two way radio bracket of un known origin (i have a bunch in my two
way parts box) the holes were already in the plastic trim under where the CC1
mounts so all i had to do is sandwich the two brackets one inside on the CC1
looking down and the other under the plastic dash trim looking up. I am sure this is
how the original installers mounted these two. CB Radio shops have universal
brackets that would work for both the CC1 and the Micor.....Or you could just fab
one from a piece of flat stock? also the holes for everything were already drilled so
all i had to do is drop the bolts down.....put on the lock washer and nut.....done!