|
|||||||
| Restoration-related Equipment Tech Any questions or information about any period-correct resto equipment (ie. switchboxes, lights, radios). |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Quote:
They look great but original looking!
__________________
ssp91ssp Hector 1992 PO.Oregon Police, Bimini Blue, Unit #85655, Plate #SMY174 Unmarked, Served Central,North, East Precinct until Aug 2000. 1988 Colorado State Patrol,Unit #246,DSO 76, Glenwood Springs CO. |
|
#2
|
|||
|
|||
|
Thnaks guys.....7 miles from the house, didnt know they where in KC. Yellow pages has them as an engine shop..Ill be on their door step Wednesday.
|
|
#3
|
||||
|
||||
|
Let us know how it goes Jim....they are about the same distance from my house. I need to get over there and get it done too!
__________________
Mike 1992 Michigan State Police SSP Mustang #5114 1993 Wisconsin State Patrol SSP Mustang 1993 Missouri State Highway Patrol SSP Mustang P641 http://members.fotki.com/MOstang/ |
|
#4
|
||||
|
||||
|
Quote:
They look great but NOT original looking!
__________________
ssp91ssp Hector 1992 PO.Oregon Police, Bimini Blue, Unit #85655, Plate #SMY174 Unmarked, Served Central,North, East Precinct until Aug 2000. 1988 Colorado State Patrol,Unit #246,DSO 76, Glenwood Springs CO. |
|
#5
|
||||
|
||||
|
Had to read your oiginal post twice but figured that's what you meant.
__________________
Mike 1992 Michigan State Police SSP Mustang #5114 1993 Wisconsin State Patrol SSP Mustang 1993 Missouri State Highway Patrol SSP Mustang P641 http://members.fotki.com/MOstang/ |
|
#6
|
|||
|
|||
|
Back to the drawing board. Keystone in KCMO wants $139.00 a wheel and they send out !
|
|
#7
|
||||
|
||||
|
They probably pay a local body shop $70 each and then mark them up...
__________________
Bill Jr. To everyone out there, wherever you are. Remember, the light at the end of the tunnel may be the police chasing you down in their own Mustang! |
|
#8
|
||||
|
||||
|
Got by the local Keystone shop here in the Detroit area today (unfortunately they moved on labor day and haven't updated address on their webpage). Just as an fyi for folks this Keystone shop is charging to refinish at $100 per Mustang 10-hole wheel with a 2-3 day turnaround for an order. No quantity discounts unless you have 100s to refinish
.
__________________
Mike 1992 Michigan State Police SSP Mustang #5114 1993 Wisconsin State Patrol SSP Mustang 1993 Missouri State Highway Patrol SSP Mustang P641 http://members.fotki.com/MOstang/ |
|
#9
|
||||
|
||||
|
I had mine painted @ $50/wheel. I am satisfied with the finish. Had a shop down the street do it. They are in Berkley, MI. Only bad thing was that a kid at Discount tire put a weight on the outside when I specifically asked for them to be on the inside, then realized his mistake and moved it to the inside, but chiped the paint on the rim!
__________________
Toshi '93 SSP '90 LX 'vert - Sold '87 LX hatch (parted out) '88 LX 'vert (should have never) '83 GL hatch (college car, long gone) |
|
#10
|
||||
|
||||
|
Be careful on the powder coating ! To get clear powder coat to stick well on these wheels they have to sandblast them.
Which removes the poliched look, and it pits them bad, not smooth. I am doing my wheels now. I called around on powder coating, and they all said they had to blast them. NOT happening ! Sam's ( mustang kid ) Dad, Chris, gave me the following..... WalMart, get some AIRCRAFT REMOVER spray cans, around $7.00 a can or so. Will need 1 to 2 per wheel. It removes the clear on these wheels well. A little scrubbing and the clear comes off. You have to let it sit on there a bit, test it. I had an extra wheel and used it as a sample. Works well. The finish is very nice, smooth and clean ( unless you have curb rash ) Once cleaned, get a clear automotive finish at an automotive paint store. They can help you with the correct stuff. You can spray it yourself, or have a buddy that paints do it. I'm just doing the outsides. Scrubbing and cleaning the insides is all. They look like they came from the factory that way. Avoid powder coating if you want an original look ! Beats $130.00 a wheel !! john
__________________
John 1992 CHP #E895201 |
![]() |
| Thread Tools | |
| Display Modes | |
|
|