Special Service Mustang.net Forums

Go Back   Special Service Mustang.net Forums > Members' SSPs
Register FAQ Members List Calendar

Members' SSPs A place to post up pics of your SSP, whether restored, in-progress, or somewhere in-between.

Reply
 
Thread Tools Display Modes
  #1  
Old 02-05-2021, 04:55 PM
resparza86's Avatar
resparza86 resparza86 is offline
Member
 
Join Date: Mar 2014
Location: Lake Elsinore
Posts: 22
Default 1993 CHP Mustang

Everybody can relax I found the car, needs some suspension work, shocks, brakes, brake pads, lining, steering box, transmission, rear-end, maybe a little wiring lol. I picked her up yesterday and had her towed home. She runs, but the exhaust was cut, so I didn't want to get jammed for the excessive loudness. It really loud. The outside is ok, nothing major. The driver's door isn't the original. It struck a few years ago by a forklift. The inside is rough. So the first thing on my list is to get the exhaust welded and the interior started on. It needs a headliner, the new center console, carpet, upholstery, well pretty much everything. The dash doesn't light up, so lots of work will definitely go into the interior first. As I do that, I will also look for CHP equipment at the same time. I'll post pictures in a few hours so everyone can see the car. I would appreciated and help or guidance on good used or NOS parts or CHP equipment. Here is a pic in the meantime.
Attached Images
File Type: jpg 20210204_230429.jpg (31.3 KB, 117 views)
Reply With Quote
  #2  
Old 02-08-2021, 08:09 AM
chp1982 chp1982 is offline
Senior Member
 
Join Date: Jan 2008
Location: Atlanta
Posts: 922
Default

Looks good. Late model restoration and national parts depot will be helpful for much of what you need, restoration-wise.
Good used parts are tougher to find but definitely out there. The Foxbody pages on Facebook are where most of the discussion on those parts seems to be.
Reply With Quote
  #3  
Old 02-13-2021, 03:03 PM
MOstang's Avatar
MOstang MOstang is offline
Senior Member
 
Join Date: Jul 2008
Location: Livonia, MI
Posts: 2,961
Default

Congratulations on your acquisition.
__________________
Mike

1992 Michigan State Police SSP Mustang #5114
1993 Wisconsin State Patrol SSP Mustang
1993 Missouri State Highway Patrol SSP Mustang P641

http://members.fotki.com/MOstang/
Reply With Quote
  #4  
Old 02-25-2021, 09:53 PM
resparza86's Avatar
resparza86 resparza86 is offline
Member
 
Join Date: Mar 2014
Location: Lake Elsinore
Posts: 22
Default

Thank you, I went ahead and started to order parts from LMR and as well from Ebay. I already stripped out the interior and started working on the engine bay. The goal is to take the engine out this summer and have it machined and all that good stuff. I've noticed their isn't a oil cooler and the smog pump was deleted. My guess is it was suppose to have both, but I'm not 100%. Would anyone have a clue if CHP deleted these or had them? I've gotten a few goodies like the streetsweeper and two GE RAngers. I also ordered a 4000R bulb, it's not wagner, but it should do the trick. The interior is crap, so, I'll definitely need a replacement and their is rust on the passenger floorboard. There is a patch panel on the driver's side of the trunk. Which is right around where the ball antenna was. More to come throughout now and until the summer. Still need spotlamps and the other gizmos and gadgets.
Attached Images
File Type: jpg 20210223_172113.jpg (49.5 KB, 25 views)
File Type: jpg 20210223_172236.jpg (48.1 KB, 24 views)
File Type: jpg 20210224_190052.jpg (74.4 KB, 24 views)
File Type: jpg 20210224_190233.jpg (54.7 KB, 18 views)
File Type: jpg 20210224_190921.jpg (42.5 KB, 18 views)
File Type: jpg 20210225_170150.jpg (49.5 KB, 17 views)
File Type: jpg 20210225_170155.jpg (42.9 KB, 24 views)
Reply With Quote
  #5  
Old 02-25-2021, 09:55 PM
resparza86's Avatar
resparza86 resparza86 is offline
Member
 
Join Date: Mar 2014
Location: Lake Elsinore
Posts: 22
Default

Another shot of the rear.
Attached Images
File Type: jpg 20210224_190228.jpg (32.6 KB, 84 views)
Reply With Quote
  #6  
Old 02-26-2021, 10:32 PM
ssp5.0 ssp5.0 is offline
Member
 
Join Date: Oct 2008
Location: British Columbia
Posts: 45
Default '93 CHP

The spare tire cover board, is not the one used on SSP's with the full size spare!
Reply With Quote
  #7  
Old 11-12-2023, 11:48 PM
resparza86's Avatar
resparza86 resparza86 is offline
Member
 
Join Date: Mar 2014
Location: Lake Elsinore
Posts: 22
Default

Prepped the unit to pull out the motor.
Reply With Quote
  #8  
Old 11-15-2023, 08:36 PM
bbodybill bbodybill is offline
Member
 
Join Date: Dec 2013
Location: calif
Posts: 10
Default Have a set of 10 hole wheels

$300.00 in Fullerton Bill
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:47 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.