|
Special Service Mustangs/Parts Wanted Cars and Parts wanted here. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
'84 Belt Tensioner Assy
My '84 OSP is in need of a good used one or a new one if anyone has a source, thanks.
__________________
Gregg '89 FHP Unit # 435 (Deceased) '89 FHP Unit # 1526 Troop H (Madison)SOLD 12/3/13 '89 SCHP Marked Unit # 2-12-80 SOLD 6/21/15 '88 SCHP Unmarked Unit # 2-12-23 SOLD 9/3/12 '90 MSHP Marked Unit # P-162 Plate # 642-HP SOLD 12/17/11 '88 MSHP Marked Unit # P-162 Plate # 642 |
#2
|
||||
|
||||
Might be able to help you... posted reply over on .org, too long a story to re-type...... lol
__________________
2012 Kona Blue Mustang GT 1985 OSP SSP 1984 OSP SSP 1984 SVO - Project 1969 Mach1 390 S-Code 1966 Mustang Coupe w/ 351w |
#3
|
||||
|
||||
cut and paste?
__________________
Jim for the first time since 1998 there is only two left: 1984 Oregon SP unmarked 1986 Idaho SP |
#4
|
||||
|
||||
Oops.... forgot that shortcut, sorry here you go.... Might be able to help you.. the local Pick-A-Part yard got in a 1984 V6 auto lx about a month ago. Was lt. met. blue with the lt. blue interior, told me I could have all the plastic trim, rear int. quarters and back seat for 40 bucks. The problem is that he wanted to get it processed first, when I came back 2 days later it was stacked on top of an Astro van. He said they would be getting it in the yard soon, checked back 3 days later and now it is in the middle of a stack of cars 10 wide and 2 high. It now has a Skylark stacked on top of it so the roof, fenders and hood are now toast, was pretty straight car. So as soon as it gets un-buried I can check on the condition of belt/retracter. The interior was pretty clean but a dog or cat had been living in it for awhile and it smells BAD! Front seats are toast but rear looked usable with cleaning. Going back Monday to bug him some more about car and see if he could dig it out for me. Guessing it won't be much if any cost to me for the part, pretty cool guy he calls me the 'Mustang Guy' and hate to burn bridges, the price always seems to go up the next time you buy something. Will shoot you a PM monday to let you know
__________________
__________________
2012 Kona Blue Mustang GT 1985 OSP SSP 1984 OSP SSP 1984 SVO - Project 1969 Mach1 390 S-Code 1966 Mustang Coupe w/ 351w |
#5
|
||||
|
||||
reply to question about mirrors and interior condition : I believe it did have the chrome mirrors and rocker strips. All the trim was taped up with masking tape like they were going to paint car because the body was 90% bare metal. Must have been stored inside because only had very light surface rust and the tape hade been on there a long long time. I'll check closer if it's out of the pile Monday and maybe get some shots. This being an LX had a chrome strip on the door panel vs. no strip on it for the L model like my 84 OSP. I know the dash is shot and it had a console in it. Will be able to look at it better when out of stack.
__________________
__________________
2012 Kona Blue Mustang GT 1985 OSP SSP 1984 OSP SSP 1984 SVO - Project 1969 Mach1 390 S-Code 1966 Mustang Coupe w/ 351w |
#6
|
||||
|
||||
I should have been a little more specific. I'm talking about the engine fan belt tensioner.
__________________
Gregg '89 FHP Unit # 435 (Deceased) '89 FHP Unit # 1526 Troop H (Madison)SOLD 12/3/13 '89 SCHP Marked Unit # 2-12-80 SOLD 6/21/15 '88 SCHP Unmarked Unit # 2-12-23 SOLD 9/3/12 '90 MSHP Marked Unit # P-162 Plate # 642-HP SOLD 12/17/11 '88 MSHP Marked Unit # P-162 Plate # 642 |
#7
|
|||
|
|||
I found mine in the trunk of a junker in the junk yard!
actually my wife found it. i showed her what i was looking for and we started searching the 80's Mustangs. look every place in the salvage cars trunk interior everyplace. |
#8
|
||||
|
||||
Are the tensioners the same from year to year? I know they interchange , but the one one my 84 the spring housing is more rounded on the end and it has a metal tab on the side to hook a prybar into....
__________________
2012 Kona Blue Mustang GT 1985 OSP SSP 1984 OSP SSP 1984 SVO - Project 1969 Mach1 390 S-Code 1966 Mustang Coupe w/ 351w |
#9
|
||||
|
||||
Are the tensioners the same from year to year? I know they interchange , but the one one my 84 the spring housing is more rounded on the end and it has a metal tab on the side to hook a prybar into.... Are the V6 ones the same, hard to check on this car yet, it's still stacked up.
__________________
2012 Kona Blue Mustang GT 1985 OSP SSP 1984 OSP SSP 1984 SVO - Project 1969 Mach1 390 S-Code 1966 Mustang Coupe w/ 351w |
#10
|
||||
|
||||
Ugh, what a sad end for a pony...getting humped by a Buick in a stinkin' boneyard!
|
|
|