|
Special Service Mustang Tech Any and all technical questions for SSP cars. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Radio Antenna Delete Plate
OK, so I ordered the delete plate from Fox Resto a while back. When I removed the radio antenna, I found that my friend did not do that when he painted, so I'll need to touch up that area as best I can to get rid of the yellow paint now exposed.
The real problem is that my delete plate doesn't fit. Rather, it's too loose and won't stay in. I've looked and looked at pics from the net and I cannot find a close up. Does the gasket/spacer from the radio antenna still go between the delete plate and the fender? It looks too thin with just the delete plate. Can someone post some close up photos of theirs, please? And where does the double-sided tape go? Thanks in advance. Greg
__________________
1982 CHP Mustang Coupe, Unit # E870567 **SOLD to chp1982** 1988 Mustang 5.0 LX, Unit # HP 43 (Wyoming Highway Patrol) 1991 Ford Crown Victoria S (Brentwood, CA Police Dept/Cinema Vehicle Svcs) 1992 Chevrolet Camaro RS B4C, Unit # 360 (Colorado State Patrol) **SOLD BACK TO CSP** 1996 Bronco XL 5.8L (California Highway Patrol) |
#2
|
||||
|
||||
with plate...
__________________
1982 CHP Mustang Coupe, Unit # E870567 **SOLD to chp1982** 1988 Mustang 5.0 LX, Unit # HP 43 (Wyoming Highway Patrol) 1991 Ford Crown Victoria S (Brentwood, CA Police Dept/Cinema Vehicle Svcs) 1992 Chevrolet Camaro RS B4C, Unit # 360 (Colorado State Patrol) **SOLD BACK TO CSP** 1996 Bronco XL 5.8L (California Highway Patrol) |
#3
|
||||
|
||||
with plate "installed"...
__________________
1982 CHP Mustang Coupe, Unit # E870567 **SOLD to chp1982** 1988 Mustang 5.0 LX, Unit # HP 43 (Wyoming Highway Patrol) 1991 Ford Crown Victoria S (Brentwood, CA Police Dept/Cinema Vehicle Svcs) 1992 Chevrolet Camaro RS B4C, Unit # 360 (Colorado State Patrol) **SOLD BACK TO CSP** 1996 Bronco XL 5.8L (California Highway Patrol) |
#4
|
||||
|
||||
the delete plate is smaller than the antenna base. You are going to have to repaint that area.
__________________
Jim for the first time since 1998 there is only two left: 1984 Oregon SP unmarked 1986 Idaho SP |
#5
|
||||
|
||||
The arrows point to your old gasket/double sided tape. You can get some from a supply house and make your own. I would repaint the whole fender.
__________________
Bernie 1993 FHP 813 1986 UHP SSP slicktop- Getting there little by little. 1993 Floyd Co Ga\Rome Ga pd SSP SOLD Even grief recedes with time, but we must Never Forget. 9-11-01 Mustang Club of America member. |
#6
|
||||
|
||||
So the tape is all that holds this on? It just looks too flat compared to the photos I've seen online. That's why I asked if there was a gasket used between this and the fender. And I sure don't want white double-faced tape showing (that's what came with this plate).
The whole car needs to be stripped or sanded and repainted. I just don't have that kind of financing right now. I want it done right. The Bullitt is about to be paid off, so that car payment will become a restoration savings account. If someone could post up a photo of theirs with this plate installed, it would be much appreciated.
__________________
1982 CHP Mustang Coupe, Unit # E870567 **SOLD to chp1982** 1988 Mustang 5.0 LX, Unit # HP 43 (Wyoming Highway Patrol) 1991 Ford Crown Victoria S (Brentwood, CA Police Dept/Cinema Vehicle Svcs) 1992 Chevrolet Camaro RS B4C, Unit # 360 (Colorado State Patrol) **SOLD BACK TO CSP** 1996 Bronco XL 5.8L (California Highway Patrol) |
#7
|
||||
|
||||
Are you planning on having the car stripped down to the metal when it is painted? If the last guy didn't sand off all the yellow that could spell some paint trouble in the future. I'm sure you will have the car done right though
I can go and take some pictures of the delete plate on my dads "original" 92 CHP. I'm sure Ford didn't change anything lol |
#8
|
||||
|
||||
I used a double stick foam type tape piurchased from auto parts store, same kind used to attach emblems on a car etc.
Attached pieces to the delete plate ( trim it before attaching to fender ) Then just press it on over the antenna hole. It's applied same as an emblem ( example the 5.0 emblem ) double stick tape is all. You can see a layer of the tape between the fender and plate. Make sure you get the dark gray or black double stick tape of course.
__________________
John 1992 CHP #E895201 |
#9
|
||||
|
||||
This isn't the best photo, blurry, but you can see the dark gray double stick tape between the plate and fender.
hope it helps some lol sorry, can't get the lighting right.
__________________
John 1992 CHP #E895201 |
#10
|
||||
|
||||
Please do. Yes, I want the car sanded to bare metal or media blasted. Same as some other restos we've seen here. She'll need some body work along the way, too.
__________________
1982 CHP Mustang Coupe, Unit # E870567 **SOLD to chp1982** 1988 Mustang 5.0 LX, Unit # HP 43 (Wyoming Highway Patrol) 1991 Ford Crown Victoria S (Brentwood, CA Police Dept/Cinema Vehicle Svcs) 1992 Chevrolet Camaro RS B4C, Unit # 360 (Colorado State Patrol) **SOLD BACK TO CSP** 1996 Bronco XL 5.8L (California Highway Patrol) |
|
|