WANTED: Decibel DB702 White antenna base

ChrisL · #1 09-30-2010, 12:36 AM

I need a DB702 in white for my '86 DPS coupe. The car is going to body/paint in the spring, and I can't have this big gaping hole in the 1/4 panel without something to seal it. Please reply here or PM me.

Thanks!

ChrisL · #2 10-04-2011, 05:06 PM

TTT!!!

texunter · #3 10-05-2011, 01:29 AM

I've got one. And I have the correct whip for it. You would have to work out the wiring though.
Ted

ChrisL · #4 01-09-2012, 08:51 PM

Back to the top here, now I just need the cable for a DB702 (will have a fitting on the end that the White DB702 base threads onto).

Anyone, please!?

ImEvil1 · #5 01-09-2012, 10:51 PM

Should be a regular style NMO mount, no?

texunter · #6 01-09-2012, 11:16 PM

Quote:

Originally Posted by ImEvil1

Should be a regular style NMO mount, no?

It is..3/4 inch regular nmo.

Ive used the smaller one before but it barely grabs the edges of the hole. = No good.

ImEvil1 · #7 01-09-2012, 11:50 PM

Quote:

Originally Posted by texunter

It is..3/4 inch regular nmo.

Ive used the smaller one before but it barely grabs the edges of the hole. = No good.

That's what I thought....my '83 TX car still has the original mount on it. The lower part of the 702 is the toughest part to find, IMHO.

ChrisL · #8 01-09-2012, 11:57 PM

I bought the 3/4" NMO from radio shack, didn't fit. And they didn't have any other styles, so I don't know what I could have done wrong there. The NMO mount was too wide, the threads of the DB702 Base wouldn't fit over it.

ImEvil1 · #9 01-10-2012, 12:24 AM

Quote:

Originally Posted by ImEvil1

That's what I thought....my '83 TX car still has the original mount on it. The lower part of the 702 is the toughest part to find, IMHO.

Maybe you have the wrong base?

Have a pic you can post of it?

ChrisL · #10 01-10-2012, 12:26 AM

Maybe, I'll get it tomorrow and post a picture. When you talk about the base, are you talking about the white part, or the die-cast threaded piece under the white part?