|
Special Service Mustang Tech Any and all technical questions for SSP cars. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Where do I find a new wiring harness for my 1990 SSP?
Ok, so my restoration of my FBI SSP (1990) has ground to a halt. Original harness plus 2 others I found are toast. I understand that there were 2 or 3 types made in 1990 for the V8. I need the one with 2 8 pin connectors coming out of the firewalls. I don't know where to go next.
|
#2
|
||||
|
||||
Look at latemodelrestoration.com. I believe they sell new wiring harnesses...as I am sure a couple other companies do as well. Good luck!
__________________
1990 NMSP Unit 130 SOLD 1989 WSP SOLD 1988 FHP SOLD 1991 FHP SOLD 1993 TX DPS |
#3
|
||||
|
||||
Good thread to start with, i've considered of getting completely new wiring harness one day.. do anyone know who makes them?
__________________
Michael J nicknamed as "MJ" ---------------------------------------------------- Owned 6 Fox Mustangs since 1998. Proud owner of the vehicles: 1989 Ocala FL SSP unmarked drug enforcement unit 1989 Mustang GT (5 speed conversion) 1990 FHP unit - SOLD 1991 Davie, FL SSP #142 - SOLD 2014 VW Jetta SportWagen TDI |
#4
|
||||
|
||||
Where do I find a new wiring harness for my 1990 SSP?
I asked the guys @ Latemodel Resto last week about this.........& they referred me to a salvage yard to get a used one.
I know I've seen on Saturday & Sunday mornings on Horse Power TV that a company named Painless Performance Products sells products like this, but I've hadn't had any luck finding anything f/ my 92 LX Stang. Will post if I find or hear anything. Mike |
#5
|
||||
|
||||
I'm dealing with wiring issues on my 85 SSP, as many of the wires are baked beyond use. There's not much available yet from the aftermarket, and what you find tends to be pricey.
Here is a 8-pin plug repair (check usage, as it's marked as being for a 79-85) - http://foxresto.com/products/view/13...re_Repair_Plug For your 1990, here is a oxygen sensor harness for an auto - http://foxresto.com/products/view/56...utomatic_Trans In my case, the shop is harvesting colored wires from a good used harness (later model) to repair the existing one.
__________________
Bill Jr. To everyone out there, wherever you are. Remember, the light at the end of the tunnel may be the police chasing you down in their own Mustang! |
#6
|
||||
|
||||
Be very careful with the Oxygen harness. Correct pin configuration in the plugs is critical to prevent damage to the computer. Be sure that the configuration on the new one matches your old one. A '89 harness is definitely different from a '90.
Performance Parts Inc. may have harnesses available but they will be pricey. Good luck with it.
__________________
Gregg '89 FHP Unit # 435 (Deceased) '89 FHP Unit # 1526 Troop H (Madison)SOLD 12/3/13 '89 SCHP Marked Unit # 2-12-80 SOLD 6/21/15 '88 SCHP Unmarked Unit # 2-12-23 SOLD 9/3/12 '90 MSHP Marked Unit # P-162 Plate # 642-HP SOLD 12/17/11 '88 MSHP Marked Unit # P-162 Plate # 642 |
#7
|
|||
|
|||
wiring harness
i have a like new dash wiring harness and engine wiring harness for sell. i can send you some pictures. These are from a 1990 mustang lx 5.0 with 45,000 miles.
|
|
|