1987 Juicy- FHP roller $500
 

Just checking interest in this car. Don't have time with so many projects and need to get her in someones hands as just letting her sit is killing me. Roller with one whole milk crate full of parts and that is it. No interior, dash, motor trans etc. PM me for more info or pics.

Not sure if the car has changed any from these pics. http://s50.photobucket.com/albums/f3...FHP%20Mustang/
You have a bunch of looking cars in your other albums too Matt. http://s50.photobucket.com/albums/f315/horseplayauto/

I have gotten a set of good rust free power doors- loaded as well as front fenders, a hood and a front bumper cover. All need some body work but are in good rust free shape. There is a trunk lid as well but it needs a bit of work on the innner pinch weld for about three inches. There is some metal work to be done, a hole in the trunk floor and some small cowl / windshield issues as well as a lower frame rail that looks as if the car ran over something that came up... It is welded to the K member rather than bolted on the passenger side and need a tweak on the radiator support.

Other than that- no rust on C-pillars, floors, frame rails etc. minimal surface rust anywhere else and clean equipment holes that were filled very well. The parts left of the car fit in a milk carton. Just most of an engine harness and an ECU. Needs the entire interior, motor, trans and wiring harnesses. And paint, and a windshield, and 1/4 windows...

I can send much better pics to anyone that is interested.

As for the other cars (thanks), the 87 shares space with four others waiting for their time in the spotlight too so it would be better off passed on to someone that cares for it and can get to it faster then me.

I'm surprised someone hasn't bought this one, too. The price is right, and you don't see many '87s, either.

Sounds like this belongs in Jim Youngs warehouse.

Jim was about to be the new owner and then MJ up in Lakeland found him a more complete car.

I was going to trade him for the electronics I need to complete the 93. I am open to all sorts of deals as long as there is a Mustang or parts involved.

Correction, i'm in Eustis, lakeland is 45 mins south of me. Sorry for the deal to go down, it wasnt intentional. i had no idea about this deal between you and him.

Ok, Ok somewhere up North there where it gets cold at night.....

No big deal MJ, I am glad Jim got an easier car- cool find on that one either way. I will no doubt be keeping this one, too much of a project for most of the gang. I will get her done and have some fun with it first if thats the case.

I am thinking about a full cage, arrest me red paint, a four inch cowl hood and some Weld draglites- then a Procharged 347 stroker and a complete back half with leaxan windows and a gutted interior but I will keep the spotlight.






NOT ! Ha Ha

I can store it for someone if they want to buy it and have it shipped to my location. :)

SOLD !