1992 PA SSP
 

I started pulling trim off the car today. This is so I can start the body work and last bit of rust repair. Still have a few more items to pull after a trip to the car wash. Been raining here and my well water has a lot of rust in it. I still have to remove the rest of the trim tape also.

Good job, John.

Lookin' good! Planning on a full repaint before the 50th??

Brad that is the plan. I have some help lined up for the body work. But going to be doing it around work.

Nice going, John. Keep it up! :)

I pulled the rest of the body molding today and the minors. Then I braved the cold and went to the car wash. I used a mix of Dawn and Purple Power to hand wash the car. After getting back home I dewaxed -Degreased the roof. Then sanded it with a DA and 220 grit. When that was done I cut the rust out of the lower quarter. Tomorrow I will pull the tire and make sure all the rust and prep work is done. Then cut the patch panel and put it in. Waiting to pull quarter windows till last ( want to keep as much dust out of the interior as possible).

Update! The car is sanded and rust repair finished (found more as I was sanding the car). All dents pulled and body ready for skim coat of filler where needed. We have planed on doing that this coming up weekend. I have also been pulling window tint off so I can have it redone. Most of the back interior has been pulled out. This will make it easier to pull quarter windows and to get at back window for re-tint job.

Lookin' good! Making good progress!

+1.

X's 3