jetsonic boards
1 Attachment(s)
Which one is correct for the FHP functions?
This one??? |
1 Attachment(s)
Or this one???
Thanks. |
Both of mine have the lower one. I can get you a pic of what wiring goes where, if you need it.
|
Quote:
|
I did the same....made a good bar for Matt B. from two parts bars for his NE car. I bought another really, really nice FHP bar, but it was missing the relay. I have an extra, but I need to do the same with wiring it up (I tore it down and am restoring it, so I'm not quite ready to wire it up). I'll grab a few close-up pics of the relay in the operational bar I have in storage and post up the connections by wire color. The wiring schematic from Federal shows the connections, but I think it's easier just to duplicate the connections from the other bar.
|
I have to figure out which mirror setup to use. They don't seem to interchange and the black box that big relay sits in takes up a lot of space.
|
I'll take a good pic of the mounting, also. I don't think you can use the black box with the full-mirror setup (both of mine do not).
|
I'm curious to see how the relay gets mounted without the box. :takenotes:
|
Quote:
http://www.specialservicemustang.net/images/jet1.jpg |
I was also wrong....I apparently have one of each relay. The one in that bar matches the top one you posted.
|
All times are GMT -4. The time now is 07:51 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.