Special Service Mustang.net Forums

Page 1 of 2

Show 40 post(s) from this thread on one page

Special Service Mustang.net Forums (http://www.specialservicemustang.net/forums/index.php)

- Special Service Mustang Tech (http://www.specialservicemustang.net/forums/forumdisplay.php?f=5)

- - oil coolers (http://www.specialservicemustang.net/forums/showthread.php?t=1524)

stubes

12-01-2008 09:49 PM

oil coolers

5 Attachment(s)

does this look normal?
i purchased what was listed as a NOS 87-93 SSP oil Cooler on ebay.

it does appear new, but

along the curved edge there appears to be light green corrosion and three small spots where it looks as if weld was applied then ground down??

opinions? i have never seen a used one up close to compare this one to.

ImEvil1

12-01-2008 10:20 PM

1 Attachment(s)

Does not look normal to me. Here is an early NOS one I picked up on eBay:

ImEvil1

12-01-2008 10:21 PM

1 Attachment(s)

Pic #2:

ImEvil1

12-01-2008 10:22 PM

1 Attachment(s)

Pic #3:

stubes

12-01-2008 10:25 PM

thanks mike,
they definitly are not one in the same.

1989 Tx DPS SSP

12-01-2008 10:25 PM

Mike post the otherside of the Cooler you have.

Tom

ImEvil1

12-01-2008 10:33 PM

Tom,

#2 and #3 are the 2 different sides.

Russ,

I think this was originally for an '84 SVO, but it's close. The PN on the box is e3, but the number on the body itself is an '84 one.

stubes

12-01-2008 10:36 PM

1 Attachment(s)

here is the other side of the one i just purchased.

the thing that bothers me the most with mine is what looks like previous weld repairing on the edge.

stubes

12-01-2008 10:40 PM

1 Attachment(s)

repair?

ImEvil1

12-01-2008 10:44 PM

Sure looks that way...

All times are GMT -4. The time now is 12:40 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page