10 hole wheels machined polished
 

The best I have found in the KCMO area to re-polish / machine the 10 hole wheel is $ 100.00 a wheel. NOS wheels are going for $300.00 EACH.

My Santa Clara Car Wheels are perfect, and a previous owner had these professionally polished out. Where is everyone sending their wheels and how much? The FHP car are ok, but really need a make over to make the car. I have found a good source for powder coating the 10 hole at $40.00 a wheel in KCMO, and have an extra set. Just want to bring new life back in the 10 holes !

Jim - I'm going to be getting some re-done here this winter. They have a shop in my area too, which is great.

http://www.keystone-auto.com/bodyshops/wheels.html

See the following post started 12/28/08 for some more info too...

http://www.specialservicemustang.net...highlight=hole

Keystone will make them look like new. They also do the back sides. You need to tell them you want them a satin finish. If you don't they will put way to much clear on them and they will NOT look original.

Jim - Thanks for the input. I definately want them to turn out right the first time.

Great point on the clear !!! Keystone did my buddy's DPS wheels and they look WET !!! they have so much clear..
They look great but original looking!

Thnaks guys.....7 miles from the house, didnt know they where in KC. Yellow pages has them as an engine shop..Ill be on their door step Wednesday.

Let us know how it goes Jim....they are about the same distance from my house. I need to get over there and get it done too!

Whoops !!

They look great but NOT original looking!

Had to read your oiginal post twice but figured that's what you meant.

Back to the drawing board. Keystone in KCMO wants $139.00 a wheel and they send out !