![]() |
82 CHP Gun rack on ebay
Anyone recognize the car;)
I am guessing that he is making reproductions? Seller also has whip clips. The brackets have to be shaped though. Anyone know where I can get one of those shotguns? That would be perfect for my 85 and it is legal for a 16 year old too:) http://cgi.ebay.com/ws/eBayISAPI.dll...#ht_500wt_1287 http://i.ebayimg.com/t/CHP-Californi...NUs!~~60_3.JPG http://i.ebayimg.com/t/CHP-Californi...8O5Q~~60_3.JPG |
That's Robert Reed's handle on EBay. :)
|
I came over to post this too. Look at the different design of this shotgun rack. That would explain why my '82 CHP and several others do not have holes on the dash next to the heater and ac controls. Is this the missing link? What do you think?
Time to go look at what few interior photos we have. To the Gallery!!... Wow, only one interior photo that shows the shotgun rack and it's the "other" design that would put holes on my dash. But they're not there. |
Edit: I take that back. Really study the interior photos. Look at the Magazine Article section, too. The left radio mic is too far over to be on a bracket that mounts next to the heater/ac controls. It extends over in front of those controls. I believe the one on eBay is identical whether a reproduction or original.
|
So this is Roberts car???
http://specialservicemustang.net/for...5&d=1319991230 I can tell it is the same car in the listing because of the spotlight, the primer (shown on one of the whip clip listings), the bracket on the trans tunnel, and the auto shifter. Or is Robert just visiting the owner to take mock up photos in the car:headscratch: |
Quote:
The bracket on the eBay whip clip won't work on a Mustang, not long enough to reach the mounting position in the upper door jamb. It's identical to the one that came on mine and was replaced with a hand fabbed one that would work. I do like that State of CA fleet credit card it's sitting on though.... http://images56.fotki.com/v371/photo...eetcard-vi.jpg .... I need one to complete my CHP-33 book (carried in the pocket inside the cover). :) http://images59.fotki.com/v419/photo...1010790-vi.jpg http://images54.fotki.com/v77/photos...1010791-vi.jpg |
Hmmm...I could have sworn that was his EBay account - but I could be wrong.
|
that is robert read.
|
I'm pretty sure this seller has posted up CHP shotgun racks before.
|
Look at the difference in the back of the ebay rack from this in-service pic (magazine pic, left side photo of the two). If you zoom in, you can see what I'm talking about.
http://www.specialservicemustang.net...usmustang3.htm Same design is shown here: http://www.specialservicemustang.net/CHPatrolman2.htm Those are the only two (good) shots that I know of, and they appear to be the same rack to me. The rack I got from Robert awhile back isn't correct, just like the bracket for the whip. Nothing that a little modification won't correct, though. He does a nice job of restoring them, including the wiring. |
IIRC, that's the same seller who listed a SSP shotgun rack last year which went for the rediculous amount of $565.00!!! The only reason I remember the price is because I bid a super high amount knowing that I wasn't going to be able to watch the close of the auction, and I figured that there was no way I was going to be outbide at $555.00. Little did I know...
I will, without a doubt, have some reproduction whip clips available this winter to members here for the cost of shipping. I don't have material for the brackets, but you can fab those up yourself. I recently lost my drill press (long story), but once I get a new one I will be able to drill a straight hole through the same type of phenolic material that the CHP used. And I used a real whip clip loaned to me by ImEvil1 to recreate the proper shape/dimensions. |
Quote:
|
Robert is a good resource for CHP parts. They may need some minor modifications, but at least he is able to make them available to us.
Mike - I was referring to the mic clip bracket. That explains why my car doesn't have the holes in the dash. What is different about the back side of it? I haven't had a chance to look at it on my laptop yet. The mic clips are spread out a little far on this one but I could modify it to my tastes. |
That is NOT Robert selling the rack. He lives in Sacramento, not Bakersfield where that 82 CHP Mustang is (I thought some of you would have figured out that the seller is a member here, that is the supposed movie car). Roberts ebay name is totally different than this guys name, + RR has nothing for sale on ebay right now.
Might not be for an 82, maybe more for an 85, because in the one inservice shot of an 82 interior on the inservice photo page, the mic clip bracket is more towards the top of the dash. |
Quote:
|
cause we won't pay 500+ for it?
|
Quote:
|
seriously.....why would anyone even consider paying 229.00 for this?
it's a 50.00 rack. Made with 5.00 worth of scrap steel and an 12 volt 30.00 gun mount. So if shipping is 15.00 it's worth 50.00. If you are picking it up it's worth 35.00. nothing here is rare, or difficult to aquire. call me crazy.... but I will build my own and use the spare cash on something else. |
Quote:
|
I believe it was relisted at a lower price....$100 now with 1 day left.
http://www.ebay.com/itm/CHP-Californ...item19cb8376ff |
Dang, are y'all trying for it? I was thinking about bidding with the lower price and maybe modifying that mic bracket to be more accurate. Someone's bidding now, so I'll respect that.
If any of you have one that you don't need, remember me and my '82 CHP. :) |
I have an extra...un-restored and needs modified.
|
Send me a pm, Mike. Got pics? If it will work on my '82, I'm interested.
|
| All times are GMT -4. The time now is 06:06 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.