Special Service Mustang.net Forums

Special Service Mustang.net Forums (http://www.specialservicemustang.net/forums/index.php)
-   Special Service Mustangs For Sale (http://www.specialservicemustang.net/forums/forumdisplay.php?f=8)
-   -   1986 Nebraska SSP (http://www.specialservicemustang.net/forums/showthread.php?t=920)

86NeSSP 08-23-2011 11:25 AM

$2250.00
Reduction and this needs to go as I want to move and there is no need for me to keep paying storage for 1 car. Hate to let it go but this is not getting the attention it really deserves.

1 - working jetsonic lightbar w/o gutter brackets
2 - 85-86 steel wheels
1 - Motorola Micor radio complete.
1 - NOS Unity S5 black spotlight

Car was converted to 5 lug when it was going to be put back on the road and enjoyed daily. These parts will be removed and replaced with 87+ v8 front 4 lug spindles and hubs and the car will be riding on 4 lug wheels and tires. Might be mis-matched but will have 4 wheels and tires on it.

Can deliver in the Houston area this weekend else you will have to arrange for transport.

The car runs and drives as it sits right now... Just put a new tank with fuel pump into the car. Fuel level sender doesn't appear to be working as intended.
Also have a repacement frame rail that goes with the car for the repair that needs to happen... This car is ready to have some one really give it a home and really tear into it.

86NeSSP 08-23-2011 01:14 PM

Will update this as there are updates to be made. This car is for sale until updated here that it is not.

28HopUp 08-23-2011 01:19 PM

Quote:

Originally Posted by 86NeSSP (Post 28864)
$2250.00
Reduction and this needs to go as I want to move and there is no need for me to keep paying storage for 1 car. Hate to let it go but this is not getting the attention it really deserves.

1 - working jetsonic lightbar w/o gutter brackets
2 - 85-86 steel wheels
1 - Motorola Micor radio complete.
1 - NOS Unity S5 black spotlight

Car was converted to 5 lug when it was going to be put back on the road and enjoyed daily. These parts will be removed and replaced with 87+ v8 front 4 lug spindles and hubs and the car will be riding on 4 lug wheels and tires. Might be mis-matched but will have 4 wheels and tires on it. Can deliver in the Houston area this weekend else you will have to arrange for transport.

Just as a FYI, my car has the 87-up 4-lug front brakes, and the stock steel wheels will not clear the caliper. I will be switching to the smaller stock brakes in order to fit the correct wheels on my 85 SSP. It sounds like you may already be aware of that, based upon the comment about the mismatched wheeels, but I just wanted you to know just in case...

:)

86NeSSP 08-23-2011 04:20 PM

Quote:

Originally Posted by 28HopUp (Post 28869)
Just as a FYI, my car has the 87-up 4-lug front brakes, and the stock steel wheels will not clear the caliper. I will be switching to the smaller stock brakes in order to fit the correct wheels on my 85 SSP. It sounds like you may already be aware of that, based upon the comment about the mismatched wheeels, but I just wanted you to know just in case...

:)

Fully aware of this... I don't have the originals as they were really badly corroded and the calipers were frozen. They got chucked. There are pleanty of those smaller brakes out there. I just happen to have the bigger brakes already sitting on the floor next to the car. They were going on another car but will just go on here so it will at least be 4 lug.

mustang68949 08-24-2011 11:09 PM

well, Matt is there a payment plan on this Nebraska car??? if so just pm me!

86NeSSP 09-15-2011 10:05 AM

This is SOLD...

28HopUp 09-15-2011 11:05 AM

Congrats on the sale. Hope it found a good home. Is the new owner anybody we know?

wsharp227 09-15-2011 10:36 PM

Me. Couldnt have an 85 without an 86.

MOstang 09-16-2011 07:20 AM

Congratulations on the sale and purchase.

28HopUp 09-16-2011 09:08 AM

As Mike said - congrats on the sale and congrats on the new purchase, gentlemen!


All times are GMT -4. The time now is 03:05 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.